1 · Coil width
A 650 mm line and a 2000 mm line are different machines — arbors, mandrels, frames and hydraulics all scale with width. We build the full range.
What a coil slitting line costs
There is no single price for a slitting line — the same 1250 mm line can be built light or heavy. This page shows exactly what moves the number, so you can compare quotes like for like.
Cost drivers
Seven things decide the price
Our own rule is the client-friendly one: price is offered according to the thickness range and specification. These are the specifications that matter.
2 · Thickness range
Cutting 0.3 mm sheet and cutting 3.0 mm plate are different forces. The thicker the top end, the heavier the slitter head, drive and frame.
3 · Coil weight
Coil weight sizes the decoiler, recoiler, mandrels and foundations. A 10 Ton coil needs a heavier structure than a 3 Ton coil.
4 · Number of strips
More strips means more knives, more separator discs, a wider recoiler and tighter setting work. Strip count is quoted as per requirement.
5 · Speed
80–120 m/min is our reference band. Higher line speeds change the drive, tension control and stopping distance — and the cost.
6 · Hydraulics
Hydraulic expansion mandrels, coil car, push-off and power packs are the parts buyers forget to compare. They are where cheap lines cut corners.
7 · Automation & controls
A control panel with HMI, interlocks and fault display is not the same as a starter panel. Automation level is the last big variable.
+ · Scope of supply
Nine units and a control panel, or a single machine to add to a line you already own. Installation, commissioning and after-sales support can be included.
Compare like for like
What to ask every supplier
Two quotes for a "1250 mm slitting line" can differ by lakhs without either being dishonest — they are simply different machines. Ask these seven questions and the comparison becomes real.
- What thickness range is the line rated for at full speed?
- What coil weight and coil eye diameter are the mandrels rated for?
- How many strips, and is the separator included?
- Is the mandrel expansion hydraulic on both decoiler and recoiler?
- What is the strip width accuracy guaranteed, and measured how?
- What exactly is in the control panel?
- What is included after delivery — installation, commissioning, training, spares?
What we need
Get a real number
Send these five points and the quotation comes back against your specification, not a generic one:
| Coil width | e.g. 1250 mm — lines built 650–2000 mm |
|---|---|
| Thickness range | e.g. 0.3 – 3.0 mm |
| Coil weight | e.g. 10 Ton |
| Strip widths | The strip combination you sell |
| Material | MS · CR · HR · GI · PPGL · SS |
Try it in 3D first. Set your coil width, strip count and coil weight in the configurator, and the quotation request is filled in with that exact setup.
Questions
Price, answered
Why is there no fixed price list?
Because there is no fixed machine. A slitting line is built around the coil you run — width, thickness, weight and strip count. A published number would either be for a machine too light for your coil or too heavy for your budget. Price is offered according to the thickness range and specification.
Does the price include installation and commissioning?
Installation, commissioning and technical support are part of our service scope and can be included in the offer. Machines are packed for safe transport with worldwide delivery arranged as required — freight and site work are quoted with the machine.
Is a used line cheaper than a new one?
Usually, if the specification matches what you run. We also offer used machines — see the used coil slitting line currently available for inspection. A used line can be upgraded and re-conditioned to your requirement.
What payment and delivery terms apply?
Terms are agreed with the offer, against the specification and delivery schedule. Talk to us with your coil details and target date: contact or call +91 97694 59087.
Get a spec-based quotation
Coil width, thickness range, coil weight, strip widths and material — that is all we need to start.