Pay off
The hydraulic decoiler grips the coil eye and pays strip off at line speed.
Taloja MIDC, Navi Mumbai · 7+ years of machine building
Coil slitting lines built to your coil
We build the line around the coil you actually run — from 650 mm to 2000 mm wide, 0.3 mm to 3.0 mm thick, up to 10 Ton.
- MS · CR · HR · GI · PPGL · SS
- strip accuracy ±0.10 mm
- 80 – 120 m/min
- installation & after-sales support
What we build
Slitting lines, CTL lines, and the machines inside them
Fabricated, machined, assembled and tested at our own workshop — so a machine can be built around your requirement instead of adapted from a catalogue.
01 / MAIN PRODUCT
Coil Slitting Line
One pass turns a full-width coil into the exact strips you sell.
- 650 – 2000 mm coil width, built to your requirement
- Strip width accuracy ±0.10 mm
- Hydraulic expansion recoiler, heavy duty construction
- CR, HR, GI, PPGL and SS coils
02 / CUT TO LENGTH
Cut to Length (CTL) Line
Coil in, stacked sheets out — at an exact length every time.
- Automatic and semi-automatic versions
- Servo length control, high speed & accuracy
- Pneumatic sheet stacking
- User friendly operation
03 / SINGLE MACHINES
Single machines & upgrades
One decoiler, a new slitter head, or a rebuild of the line you already run.
- Hydraulic decoiler and hydraulic recoiler
- Pinch roll unit · slitter head · separator · tension stand
- Hydraulic scrap winder · hydraulic presses
- Upgrade and re-conditioning work on existing lines
How a slitting line works
Five steps from coil to finished strips
The same sequence on every line we build — the sizes change, the process does not.
Feed
Precision pinch rolls pull the strip flat and feed it at constant tension.
Slit
Twin knife arbors shear the full width into strips — ±0.10 mm accuracy.
Tension
Trim is wound by the scrap winder; the tension stand holds every strip tight.
Recoil
Separator discs keep lanes true, and the recoiler winds finished coils.
The line, unit by unit
Nine machines and one control panel
Every unit is modelled in 3D and downloadable — inspect the machine before it is built.
01
Hydraulic Decoiler
Hydraulic expansion · 10 Ton coil
02
Coil Car
Hydraulic lift on rails
03
Pinch Roll & Feeder
Precision rolls · adjustable top roll
04
Slitter Head
Twin arbors · ±0.10 mm
05
Scrap Winder
Hydraulic drive · low maintenance
06
Tension Stand
Back tension for tight coils
07
Separator
One lane per strip
08
Hydraulic Recoiler
High torque · uniform winding
09
Exit Car
Takes the finished coil off
—
Control Panel
Single-operator line control
Interactive 3D
Inspect the line before it is built
Rotate every machine, lift it apart assembly by assembly, run the strip through the line — then hand the model files to your engineering team.
- Orbit and zoom any of the ten units
- Exploded views of each assembly
- Run the line and watch the strip travel
- Download .glb models for CAD, AR and review
Why buyers choose us
Built heavy, held accurate, supported after
±0.10 mm accuracy
Strip width held to ±0.10 mm, so your customers get the width you promised.
Heavy duty build
Fabricated and machined for continuous production, not for a light duty cycle.
Built to your spec
Width, thickness, coil weight and strip count set by your requirement.
Service & spares
Installation, commissioning, hydraulic and crane repairs, maintenance and spares.
Materials we run
Every coil type in your yard
One line configuration handles the mix you actually process.
- MS — mild steel
- CR — cold rolled
- HR — hot rolled
- GI — galvanised
- PPGL — pre-painted galvalume
- SS — stainless steel
Where our lines work: steel service centres · tube mills · roofing sheet manufacturers · automobile industry · stainless steel processing · CR / HR / GI / PPGL coil processors.
From enquiry to running line
Four steps, one team
We fabricate, machine, assemble and test at Taloja MIDC, then install and commission at your plant.
Send the coil spec
Material, coil width, thickness range, coil weight and strip widths — by phone, WhatsApp or the form.
Spec & quotation
We confirm the line configuration and quote as per your thickness range and specification.
Build & test
Fabrication, precision machining, assembly and testing before dispatch — packed for transport.
Install & support
Installation, commissioning and technical support, with spares and maintenance afterwards.
Questions buyers ask
Straight answers
Anything else — call +91 97694 59087 or send the coil spec on WhatsApp.
What coil sizes can your slitting line handle?
Our reference line takes a 1250 mm wide coil, 0.3–3.0 mm thick and up to 10 Ton, at 80–120 m/min with ±0.10 mm strip width accuracy. We build lines from 650 mm to 2000 mm wide, and quote coil width, thickness and weight as per your requirement.
Which materials can be slit?
MS, CR, HR, GI, PPGL and SS coils. The line is configured for the material mix you run.
How many strips from one coil?
As per requirement. Knife spacing on the slitter head sets each strip width and can be re-set for a new combination.
Do you install it at our plant?
Yes — installation, commissioning and technical support, plus hydraulic repair, crane repair and maintenance work.
How is the price decided?
Price is offered according to the thickness range and specification. Send the coil details and we will quote against that specification.
Can machines be exported?
Yes. Machines are packed for safe transport with worldwide delivery arranged as required.
Send your coil spec
Coil width, thickness range, coil weight, strip widths. We reply with the line configuration and a quotation.